Crystal

Facebook Twitter Instagram

MIRROR DOORS

WHAT IS MIRROR DOOR?

Glass panels are mounted on an aluminum structure for an ultra-modern construction. Isodoor mirrored industrial and garage doors are made of aluminum and glass panels. It is used as normal lifting, high lifting or vertical lifting according to the beam section of the area to be applied.
Mirrored sectional doors are durable and long-lasting doors that are produced to provide the fastest and safest way for today’s modern businesses, especially automotive sales offices and factory entrances and exits. Panels that make up the full-view doors are produced from 500 mm – 610 mm aluminum finger-protected aluminum profiles.
Mirrored industrial doors are eye-catching door solutions suitable for modern architecture for prestigious buildings. Safety is provided by permanent surface protection with reflective and tempered glasses. Full view doors can be applied with standard control unit and remote control.
Full-vision doors with opto laser and wireless pneumatic bottom safety system feature allows the door to be opened back in case any object touches it. Full vision sectional doors can be lifted in the form of standard, low, vertical, guillotine or rails following the roof, depending on the detail in the place to be installed. Thus, the most efficient operation of the door and as little space loss as possible are ensured.
Mirrored doors can also be applied as a garage door model according to need. Surface mounted glass panels offer an impressive mix of reflectivity and transmittance. Frame profiles can be anthracite gray, black or anodized in accordance with the glass coating. Mirrored sectional doors can be lifted manually, regardless of the weight of the door, with the winding spring system, and in case of any power failure or engine failure, the door can be easily used manually or with chain hoist.
The profile thicknesses of mirrored doors vary according to the parts used and are specially designed to match each other. The glass covering the surface gives an elegant look to full vision doors. Since the frame profiles are not visible, a monolithic appearance is obtained on the front facade. Continuous glass appearance adds eye-catching to modern industrial facilities or other prestigious buildings. It fully fits the building facade with its smoked, bronze, green or silver colored glasses and frame profiles in the same tones.
Industrial door motor systems are opened manually by released the motor shaft or with the help of a chain hoist in case of power failure. It does not require lifetime lubrication. Meanwhile, even if there is electricity, manual control has priority in terms of user safety. A part of the full vision door can be divided by fixed panels to regulate pedestrian traffic in doors with a large width.
  • Cable break safety system,
  • The spring set consists of double springs,
  • Spring buffers,
  • 2 mm 2 ”galvanized steel rail set,
  • Aluminum top sealing profile,
  • Aluminum bottom sealing profile,
  • EPDM bottom sealing gasket,
  • EPDM top sealing gasket,
  • Solid shaft with keyway,
  • Special aluminium profile wind support sheet is used for doors wider than 5000 mm,
  • Single or Double Pleksiglass,
  • Spring break safety system (O),
  • Rear connection C profile,
  • Epdm-Pvc Side sealing gasket,
  • After 5000 mm double side hinges and long wheel are used,
  • Adjustable double wheel system (O),
  • Fixed side hinge system (O).
    • Minimum beam spacing for low lifting = 200 mm
    Minimum beam distance for standard lifting = 450 mm,
    Minimum beam distance for high lifting = Door height + 1000 mm,
    Minimum beam spacing for vertical lifting = Door height x 2 space required..
  • Profiles should be compatible with 40 mm panels,
  • It should be compatible for panoramic glass sections,
  • 6 mm plexiglass should be suitable for single glass systems,
  • Aluminum reinforcement profile should be applicable,
  • Plexiglass single glass glasses should be 3mm thick and double glasses should be 3 + 12 + 3 thick,
  • Aluminum profiles should be able to be painted in all RAL colors.
  • The size of aluminum profiles should be adjustable as 500 mm and 610 mm.